Chamberlain DKK Series Operating Instructions Manual page 13

Industrial door operators
Table of Contents

Advertisement

Available languages

Available languages

Contents
1.
Contents
2.
Preparatory measures
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Declaration of conformity
Preparatory measures
Before installing, operating or servicing the door operator, these operating instructions must be
read through carefully and all the safety instructions must be followed.
This symbol means „Caution!" and appears next to safety advice intended to prevent personal injury or material damage.
Please read these sections carefully. It goes without saying that the door operator hal been designed and checked for safe
operation; this can only be guaranteed, however, if the following safety instructions are observed precisely during installation
and operation.
This symbol indicates important advice, where non-compliance can result in serious injury and / or damage to property.
The door must be balanced.
When servicing or installing the door opener, suitable
protective clothing must be worn; this includes pro-
tective goggles, back support and protective gloves.
Never wear jewellery, watches or loose clothing
when servicing or installing a door opener. When
working on ladders or raised platforms, the relevant
safety procedures must be observed.
2
Do not make any attempt to loosen, move or align
the door. Contact your service company.
In order to remind everyone who operates the door
of the safety procedure to be observed, the corre-
sponding warning sign must be fixed next to the
operating unit.
2
2
3
4
4
5
5
6
6
7
8
11
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents