General Specifications - Citizen CLP-521 Technical Manual

Chapter 1 Specifications

1-1. General Specifications

Item
Cutting method
Maximum cut paper
thickness
Minimum cut paper length
Cut paper width
Durability
Paper specifications
Cut accuracy
CLP-521, CLP-621 & CLP-631
Guillotine type
0.25 mm (0.01")
25.4 mm (1")
Maximum: 118 mm (4.65")
Minimum: 25.4 mm (1")
Number of cuts:
More than 300,000 times (for 60 to 150 μm (0.0024 to 0.0059")
paper thickness )
More than 100,000 times (for 150 to 250 μm (0.0059 to
0.0098") paper thickness)
Note: - Paper with adhesive substance may be excluded from
these figures.
- Number of cuts may differ depending on the paper
material to be used.
Roll or label (continuous, die-cut, fanfold, tag and ticket).
However, the following paper cannot be used.
- Paper thickness: 0.06 mm (0.0024") or less
- Roll paper core diameter: 51 mm (2") or less
Note: Paper other than the specified may have problems
such as paper jams, so paper must be checked
whether it meets the specification or not before use.
Cut length tolerance: ±1.0 mm (±0.04") or less
Maximum cut difference between left and right edge: ±1.0 mm
(±0.04") or less
Paper feed direction
Note: - Above accuracy will be satisfied at normal
temperature/normal humidity when recommended
label paper and ribbon are used.
- Paper cut position can be adjusted using the printer
command. (Refer to the Command Reference Manual
for details.)
1-2
Descriptions
Maximum cut difference between
left and right edge