Chapter 2 Installation Procedure
2-1. Auto Cutter Unit Components
The Auto cutter unit consists of the following parts. Be sure that all the parts are included in the
auto cutter unit.
1. Cutter Unit
2. Cutter Stand Unit
3. PH, M3x6 (NI) .... 2 pcs.
4. Cutter User's Manual (JM74912-5)
5. Manual for service personnel (JM74937-0)
2-2. Maintenance Tools List
Maintenance tools shown below are needed when replacing the maintenance parts of the auto
cutter unit.
No.
1
Phillips Screwdriver screws
(Length 200 mm)
2
Phillips Screwdriver screws
(Length 100 mm)
3
Thickness Gauge
CLP-521, CLP-621 & CLP-631
Screw PH, M3x6 (NI)
Cutter Unit
Maintenance Tools List
Name
Cutter Stand Unit
Q'ty
Description
1
For 3 to 4 mm
1
For 2 to 3 mm
1
0.9mm/1.0mm
2-2
Remarks