Table of Contents
Advertisement
3-1 Starting BZMA-E555
3-2 Adding MAV to a Workgroup
8
3-1 Starting BZMA-E555 / 3-2 Adding MAV to a Workgroup
Chapter 3 Initial Setup
Note
When starting the BZMA-E555 for the first time after its installation, make sure
to log on to Windows 2000 as a user with Administrator access privileges.
To start BZMA-E555, double-click the BZMA-E555 icon on your desktop.
When starting the BZMA-E555 for the first time, the following dialog box
appears.
Enter the appropriate information in the [Serial No.] and [ID] boxes, and then
click [OK].
For more details about the serial number and ID, consult a Sony sales
representative or a Sony Service Center near you.
This procedure is only necessary the first time that you start the BZMA-E555. It
will not appear again.
To be able to access or operate an MAV on a network from the BZMA-E555, it is
necessary to add it to a workgroup. Including the target MAV, it is possible to add
up to 32 MAV to a workgroup.
Advertisement
Table of Contents
