Synchronized Actions In The Tc/Mc Area - Siemens SINUMERIK 840D sl Function Manual

Examples

4.9 Synchronized actions in the TC/MC area

Technology cycle ZIEL_POS
%_N_ZIEL_POS_SPF
PROC ZIEL_POS
SPOS=IC($A_DBW[1])
$A_DBB[1]=0
4.9 Synchronized actions in the TC/MC area
Introduction
The following figure shows the schematic structure of a tool-changing cycle.
Figure 4-6
154
Schematic sequence for tool-changing cycle
; Traverse spindle to position value that has been
stored in $A_DBW[1] by the PLC, incremental dimen-
sion
; Target positions executed in NC.
Function Manual, 08/2018, 6FC5397-5BP40-6BA2
Synchronized actions