How To Use This Manual - Canon 4K6021Z User Manual

Steps to Copy Set Values
1
Connect the computer and projectors to wired LAN or wireless LAN (*2)
(*3).
2
Startup the web browser. Input "http://(IP address of the projector for
reading)/professional/read" and then press the [Enter] key.
3
Input the login username and password on the web screen (*4).
The READ screen will be displayed.
4
Press the [Start read] button.
5
Press the [OK] button once the reading has been completed.
The read file will be saved in the download folder.
6
Input "http://(IP address of the projector for writing)/professional/write" in
the address of the web browser and then press the [Enter] key.
Input the login username and password on the web screen in the same way as
with step 3.
The WRITE screen will be displayed.
7
Press the [Browse] button. Select the set value file you saved in step 5
and then press the [Start write] button.
8
Press the [OK] button once the writing has been completed.
* If you wish to copy set values to multiple projectors, repeat steps 6 to 8.
(*1) If the user memory has already been created at the copy source, that content will be
reflected in the copy destination. If it has not already been created at the copy source, the
user memory at the copy destination will be retained.
(*2) Refer to "Network settings" in this manual for details.
(*3) Operating conditions:
• The projector should be in the projection or standby state (4K6021Z/4K6020Z/4K5020Z/
WUX7000Z/WUX6600Z/WUX5800Z)
• The projector should be in the projection state (WUX7500/WUX6700/WUX5800)
• The wired or wireless network function should be on
(*4) Refer to "Password settings" in this manual for details.
Communications may fail due to a timeout if the standby power settings of the
projector are in "Low-power" depending on the browser specifications.
In that case, reload the page and re-read/write.