Table of Contents
Advertisement
2. Plug the series A connector in the USB host or hub, or plug the Plus Power
connector in an available port of the IBM SurePOS terminal.
3. Select the USB device type. See
4. On first installation when using Windows, the software prompts you to select or
install the "Human Interface Device" driver. To install the "Human Interface Device"
driver provided by Windows click "Next" through all the choices and click "Finished"
on the last choice. The scanner powers up during this installation.
5. If you are not using a North American keyboard, scan the appropriate country bar
code under
If you are having any problems with your system, see
USB Country Keyboard Types (Country Codes)
USB Device Type
on page 6-5.
Troubleshooting
USB Interface
on page 6-6.
on page 3-2.
6-3
Advertisement
Table of Contents
