Using The Pen Holder - Wacom Cintiq 20WSX Installation Manual

Adjusting rotation
The pen display can be rotated on the display stand when the incline is less than or equal to 25
degrees.
To adjust rotation, grasp Cintiq by the main body and rotate the unit to the desired position; it will move
on the bearing hub. You can only rotate the display unit 180 degrees in either direction. If you do not
plan to rotate the Cintiq, use the rotation lock screws to fasten the display to the stand in a horizontal
position. See Optional display configurations on page 56 for more information.

Using the pen holder

The integrated pen holder is located at the back of the pen display tablet.
Note: The pen holder is not available for use when routing the cable to exit through the top cable
opening.
Next step: Go to page 13 and familiarize yourself with the pen display.
Unpacking your Cintiq
Page 11