Mercedes-Benz 190 E 2.6 1989 Owner's Manual page 26

ego Fan Speed Selection
When pushing one of these buttons 1
ton | j , the fan speed will correspond to the particular
position of the fan speed control lever (4).
The volume of fresh air supplied to the vehicle interior can
be increased by pushing lever (4) to the right.
The fan speed may be changed by moving lever (4) to
position " II" , " III" or "max" .
Function 0 = Maximum fan speed engaged.
24
Fast Cooling
•
, S , 0 or but­
•
•
•
•
•
Note:
Open the windows and/or sliding roof long enough to let
hot air inside the car escape. This helps reduce the time
the air conditioner must run before the car cools. Then,
close windows and/or sliding roof and allow air condi­
tioner to operate to its full capacity.
Turn temperature selector wheel (1) and lock in
end position " MIN" .
Push button IQl or i s in mode control (3).
Push 0 button.
Move fan speed control lever (4) to far right " max"
position.
Open adjustable air outlets (5) and (7) completely by
pushing up levers (6) and (8), respectively.
Close windows and sliding roof completely.