Canon imageFORMULA CR-135i II Instructions Manual page 46

E
Spin the rollers while wiping them clean with a firmly wrung
cloth dampened with water or a mild detergent.
There are 26 roller positions, as shown in the diagram below.
NOTE
• Use cotton swabs to clean the rollers in locations that are too narrow for
your fingers.
• Roller in position C is turned by the roller in position A. Turn the roller in
position A to wipe the rollers.
• Rollers in positions H, J, and L are turned by the roller in position K.
Turn the roller in position K to wipe the rollers.
• Rollers in positions U to Z are turned by the roller in position M. Turn the
roller in position M to wipe the rollers.
• Rollers in positions A to C are replaceable. (See "Replacing the Rollers,"
on p. 54.)
46
F
Use a clean dry cloth to clean the entire scanning glass.
Scanning Glass
G
Close the Back Maintenance Cover.