Installing Your Microwave Oven; Setting The Time(M1927N) - Samsung M1927N Owner's Instructions And Cooking Manual

Table of Contents

Advertisement

Available languages

Available languages

Installing Your Microwave oven

Place the oven on a flat, level surface that strong enough to safely bear
the weight of the oven.
1. When you install your oven, make sure there is adequate
20cm
10cm
above
behind
ventilation for your oven by leaving at least 10 cm (4
inches) of space behind and, on the sides of the oven
and 20 cm (8 inches) of space above.
10cm
of the side
2. Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3. This microwave oven has to be positioned so that plug is
accessible.
Never block the air vents as the oven may overheat and
automatically switch itself off. It will remain inoperable until it has
cooled sufficiently.
For your personal safety, plug the cable into a 3-pin, 230 Volt,
50Hz, AC earthed socket. If the power cable of this appliance is
damaged, it must be replaced by a special cable (I-SHENG
SP022, KDK KKP4819D, EUROELECTRIC 3410, SAMIL SP-
106B, MOONSUNG EP-48E, HIGH PROJECT H.P 3). Contact
your local dealer to have it replaced. The power cable of ISRAEL
is PENCON(ZD16A), S/AFRICA APEX LEADS SA16 and
NIGERIA, GHANA, KENYA and U.A.E is PENCON(UD13A1).
Do not install the microwave oven in hot or damp surroundings
like next to a traditional oven or radiator. The power supply
specifications of the oven must be respected and any extension
cable used must be of the same standard as the power cable
supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.

Setting the Time(M1927N)

Your microwave oven has an inbuilt clock. The time can be displayed
in either the 24-hour or 12-hour notation. You must set the clock:
When you first install your microwave oven
After a power failure
Do not forget to reset the clock when you switch to and from
summer or winter time.
1. To display the time in the..Then press the
24-hour notation
12-hour notation
2. Turn the Time/Weight(
3. Press the
4. Turn the Time/Weight(
5. Press the
7
Once
Twice
) dial to set the hour.
button.
) dial to set the minute.
button.
GB
button...

Advertisement

Table of Contents
loading

This manual is also suitable for:

M1917n

Table of Contents