Stihl HT 56 C Instruction Manual page 18

English
Checking security of cap
The lug on the grip must fully
–
engage the recess (arrow).
Grip the cap – it is properly locked if
N
it cannot be turned or removed.
If the cap can be turned or removed
Bottom of cap is twisted in relation to
top:
16
Left: Bottom of cap twisted
Right: Bottom of cap correctly
positioned
Place the cap on the opening and
N
rotate it counterclockwise until it
engages the filler neck.
Continue rotating the cap
N
counterclockwise (about a quarter
turn) – this causes the bottom of the
cap to be turned to the correct
position.
Turn and lock the cap clockwise –
N
see sections on "Closing" and
"Checking security of cap".
Opening screw-type tank cap
Turn the cap counterclockwise until
N
it can be removed from the tank
opening.
Remove the cap.
N
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends you use the STIHL filler
nozzle (special accessory).
Closing screw-type tank cap
Place the cap in the opening.
N
Turn the cap clockwise as far as
N
stop and tighten it down as firmly as
possible by hand.
HT 56 C