Water Supplies - Rheem Integrity 20 Owner's Manual And Installation Instructions

INSTALLATION - DIAGRAMS
Your Rheem water heater is manufactured to suit the water conditions of most
Australian and New Zealand metropolitan water supplies. However, there are some
known water supplies that can have detrimental effects on the water heater and its
operation and/or life expectancy. If you are unsure of your water quality, you can
obtain information from your local water supply authority.
This water heater is not suitable for connection to bore water or spring water unless
a water treatment device is fitted.
INSTALLATION - NO CONTROLLERS
TLD = Temperature Limiting Device
Note: Factory preset temperatures are:
50ºC for Australia
55ºC for New Zealand

WATER SUPPLIES

27