Table of Contents
Advertisement
Notes：
Put down the top steady avoiding any demage after lifting it , otherwise it will be very difficult to install later.
5.2 Close the chassis
This section introduce the procession of locating the top and closing chassis .Please act as the following
procession:
As the following picture , put the top and bottom well according to thier place:
(6)
Attach the edges of the top and the bottom according to the picture;
(7)
When the two sections are together, slide the top setion into the slots on the front panel of the bottom to
make sure the following :
The top section fits into the bottom section .The bottom section fits into the front of the top section.
Each side of the top and bottom sectionfits together.
(8)
Replace and tighten the top screws by the screw-driver.
(9)
Reset the chassis of the Router on a desktop or in a rack.
(10)
Connect all cables after completing all work.
- 21 -
DI-2621 Router
Advertisement
Table of Contents
