Overload Protection; Cleaning; Customer Service - Bose SoundTouch SA-5 Owner's Manual

Care and Maintenance
Problem What to do
Right and left Confirm speaker wire connections:
stereo chan- • Connect speaker wires from the amplifier's SPEAKERS OUT + L -
nels are heard
on the wrong • Connect speaker wires from the amplifier's SPEAKERS OUT + R -
speakers
Bass or treble
is weak
Interference • Firmly insert the speaker wires into the terminals on the back of the
• Keep the system away from metal objects, other audio/video compo-

Overload protection

The amplifier's overload protection feature automatically reduces maximum power
output to prevent the amplifier from getting too hot. This may occur when the
amplifier plays at high volume for a long duration or if it is installed in a location
with limited ventilation. Ensure the system is installed in a well-ventilated area. Full
maximum output automatically returns as the system cools down.

Cleaning

CAUTION: Disconnect the power cord from the AC (mains) power outlet before
cleaning.
To clean the amplifier, use only a soft, dry cloth to remove dust from the outside of
the enclosure. You may use a brush attachment on a vacuum cleaner to clean the
hard-to-reach areas. DO NOT use any solvents, chemicals or cleaning solutions
containing alcohol, ammonia or abrasives.

Customer service

For additional help using the system:
• Visit SoundTouch.com
Contact Bose customer service. Refer to the quick start guide in the carton for
contact information.
22 - English
connector to your left speaker.
connector to your right speaker.
Check speaker wire connections. Confirm that the individual wires are
connected + to + and – to –.
speakers and on the amplifier's connector panel. Confirm that no
individual wires are touching across terminals.
nents, and direct heat sources.