Powering On The Switch; Verification Before Power-On; Power-On Sequence - HP A5120 EI Series Installation Manual

On the Settings tab
6.
Figure 37 Setting terminal emulation

Powering on the switch

Verification before power-on

Before powering on the switch, verify that:
 The power cord is properly connected.
 The input power voltage meets the requirement of the switch.
 The console cable is connected correctly.
 The console terminal is powered on and configured correctly.

Power-on sequence

The A5120-24G-PoE+ EI TAA (2 slots) switch is used in the following example.
The power-on sequence is as follows:
Power on the switch. The console terminal screen displays the following information:
1.
Starting......
********************************************************************************
*
(Figure 37), set the emulation to VT100 and click OK.
32
*