Sony BKMA-U55 Installation Manual page 12

2-2. Confirming Versions of MAV-555 and BKMA-505/510/520/530/560
Preparation
1. Set the IP address and the sub-net mask of the MAV-555 to the factory settings.
m
. The IP address and sub-net mask can be confirmed in set-up menu No. 220.
. The factory settings are as follows:
IP address : 192.168.0.1
Sub-net mask : 255.255.255.0
2. Set the IP address and the sub-net mask of the personal computer as follows:
IP address : 192.168.0.2
Sub-net mask : 255.255.255.0
3. Start up the personal computer.
4. Wait for the MS-DOS prompt (or command prompt) to appear.
5. Input [ping 192.168.0.1].
Microsoft(R) Windows 95
(C)Copyright Microsoft Corp 1981-1995.
C:\>ping\192.168.0.1"
6. Confirm that the reply is returned normally.
Message example (normally)
C:\>ping\192.168.0.1"
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time=2ms TTL=254
Reply from 192.168.0.1: bytes=32 time=1ms TTL=254
Reply from 192.168.0.1: bytes=32 time<10ms TTL=254
Reply from 192.168.0.1: bytes=32 time=1ms TTL=254
C:\>
Message example (abnormally)
C:\>ping\192.168.0.1"
Pinging 192.168.0.1 with 32 bytes of data:
Request timed out
Request timed out
Request timed out
Request timed out
C:\>
7. If the reply is not returned normally, input [arp -d 192.168.0.1] and perform from step 5 again.
(There can be a case that the APR table information is left remained when two or more MAV-555s
are connected continuously.)
2-2 (E)
BKMA-U55