Expand Your Telephone System; Add And Register A Handset - VTech DECT CS6419-2 Online User's Manual

Vtech telephone user manual
Hide thumbs Also See for DECT CS6419-2:
Table of Contents

Advertisement

Appendix

Expand your telephone system

The handsets provided with your telephone system are already registered. Each
handset is assigned a number that show on the handset display. Additional
handsets registered to the telephone system are assigned in sequential order.
For instance, if the telephone system already has HANDSET 1 and
HANDSET 2, the new registered handset is assigned HANDSET 3. This
telephone system accommodates up to five handsets.
Add and register a handset (optional)
You can add new handsets (CS6409, purchased separately) to your telephone
system. Each handset must be registered with the telephone base before use.
When first purchased, each expansion handset shows 1.PRESS FIND HS ON
BASE 4 SEC and 2.THEN PRESS # ON HANDSET alternately. You may need
to charge the handset before registering to the telephone base. For more details
on battery charging, see the table on page 4.
To register a handset:
1.
Place the unregistered handset in the telephone base or charger. If
1.PRESS FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON HANDSET
do not appear alternately on the handset screen after a few seconds, remove
the handset and place it in the telephone base or charger again.
2.
On the telephone base, press and hold
/FIND HANDSET for about four seconds until the red
IN USE light on the telephone base turns on.
3.
On the handset, press # (pound key) and the handset shows
REGISTERING..... PLEASE WAIT. The handset shows
HANDSET REGISTERED and you hear a beep when the
registration process completes. It takes about 60 seconds
to complete.
If the registration fails, the handset shows REGISTRATION FAILED and
then 1.PRESS FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON
HANDSET alternately. Remove the handset from the telephone base and
place it back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.
To reset the telephone, unplug the power and the battery for a few seconds
then plug them back in.
Only one handset can register to the telephone base at a time.
38

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents