Panasonic Lumix DC-G100 Operating Instructions Manual page 475

TV, PC, Printer
No image on the TV.
The TV screen is blurry or not colored.
• Confirm the connection with the TV. (436)
VIERA Link is not working.
• Check that the [VIERA Link] of the camera is set to [ON]. (360)
• Check the VIERA Link setting on the connected device.
• Turn off and on the camera.
Cannot communicate with the PC.
• Set the [USB Mode] of the camera to [PC(Storage)]. (359)
• Turn the camera off and on.
Cannot print when the camera is connected to a printer.
• Pictures cannot be printed using a printer that does not support PictBridge.
• Set the camera's [USB Mode] to [PictBridge(PTP)]. (359)
Others
There is rattling noise from the lens when the camera is turned on or
off, or when the camera is swung.
There is a sound from the lens when recording.
• This is the sound of the lens moving and aperture operation. It is not a malfunction.
An unreadable language was selected by mistake.
• Reselect the language from the menu using the following procedure:
[ ] [
The camera becomes warm.
• The camera surface and back of the monitor may become warm during use, but
this does not indicate a problem with performance or quality.
] Select desired language (360)
16. Materials
475