Panasonic Lumix DC-G100 Operating Instructions Manual page 359

[USB Mode]
[TV Connection]
[ ] [Select on connection]/[
[ ] [PictBridge(PTP)]
This sets the communication method to be used when the
USB connection cable is connected.
[ ] [Select on connection]: Select this setting to
select the USB communication system when connecting to
another device.
[ ] [PC(Storage)]: Select this setting to export images to
a connected PC.
[ ] [PictBridge(PTP)]: Select this setting when
connecting to a printer that supports PictBridge.
[HDMI Mode (Play)]
Sets the HDMI output resolution for playback.
[AUTO]: Outputs with a resolution suited to the connected
TV.
• If no image appears on the TV with [AUTO], switch to
a constant setting other than [AUTO] to set a format
supported by your TV.
(Refer to the operating instructions for the TV.)
*
1 Even when [4K/25p] is set, MP4 motion pictures
recorded with [4K/100M/30p] will be output at a
resolution of "4K/30p".
*
2 Depending on the connected TV, 480 available scan
lines may be used for output.
] [PC(Storage)]/
[AUTO]/[4K/25p] *
[720p]/[576p] *
2
13. Menu Guide
1
/[1080p]/[1080i]/
359