Answer A Ptt Call; Change A One-To-One Ptt Call To Intercom Call - VTech LS6475-2 User Manual

Dect 6.0 cordless telephone
Hide thumbs Also See for LS6475-2:
Table of Contents

Advertisement

Multiple handset use

Answer a PTT call

You can respond to a PTT call whenever the speakerphone light is off, as
described below.
1.
When your handset receives a PTT call, the handset beeps and the screen
displays Press and hold [PTT] to talk.
2.
When the other party is speaking, your speakerphone light is on, and your
handset displays PTT From HS X To HS
handset and Y represents the destination handset; a maximum of four
handset numbers appear).
When your speakerphone light is off and the screen displays Press and hold
3.
[PTT] to talk, press and hold PUSH TO TALK on your handset. You will hear
a chirp. Speak towards the handset.
While you are speaking, your handset displays PTT To handset:
represents the handset numbers of one or more destination handsets; a
maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release PUSH TO TALK. Your handset will beep. After the beep,
if your speakerphone light is off, you can press and hold PUSH TO TALK to
speak again or the destination handset can respond.

Change a one-to-one PTT call to intercom call

You can convert a one-to-one PTT session to an intercom call.
When your handset displays Press and hold [PTT] to talk, press
1.
/SELECT. The screen displays >Intercom.
MENU
2.
Press
/SELECT.
MENU
If you have two handsets, your handset displays Calling other handset.
The destination handset temporarily displays Push to talk Ended and then
Other handset is calling.
If you have three or more handsets, your handset displays
Calling HANDSET Y (Y represents the destination handset). The
destination handset temporarily displays Push to talk Ended and then
HANDSET X is calling (X represents the originating handset).
3.
On the destination handset, press
(0-9, # or
) to answer the intercom call. Both handsets now display Intercom.
To end the intercom call, press OFF/
4.
telephone base or charger. Both screens display Intercom ended.
Y
(X represents the originating
/
/SPEAKER or any dialing key
,
FLASH
or place the handset in the
CANCEL
39
(X
X

Advertisement

Table of Contents
loading

Table of Contents