Creating A Patrol - Swann NHD-817 Instruction Manual

Creating a Patrol

1.
Click "Patrol" to access the Patrol menu.
2.
Click the first Preset slot available.
3.
Click "Set" then select from one of the available
Preset positions that you created. Adjust the "Du-
ration" and "Speed" (some experimentation may
be required) then click "OK".
Repeat the above steps to add multiple Preset
2
3 4
1
positions. Select a different Preset slot for each
Preset that you want to add.
4.
When finished, click "Add" to add each Preset
to the Patrol.
5.
Click "OK" to confirm then right-click to exit.
Click "Start" to enter Patrol mode.
5
9