Table of Contents
Advertisement
Caution:
Do not unplug the power cord while the LED is blinking in green. If the power cord is
removed, downloading the flash ROM data fails
5)
When the LED stops blinking and lights in green, press the Power button. (The downloading is
finished, and the printer is turned off.)
Caution:
While the flash ROM data is downloaded, the Resume/Cancel button and the print head
cover switch are invalid.
*1: In the flash ROM download mode, the printer ID is automatically set to the PIXUS 50i.
*2: The USB tool will be supplied via the QISS software download. 2 types of the tool will be prepared,
for Windows 9x/Me, and for Windows 2000/XP. Use either tool according to the OS used. For
procedures for using the USB tool, see "How to use the USB tool" below.
*3: Specific flash ROM download file name(s) will be announced in Service Information, and the file
itself will be supplied via QISS, as an upgrade program.
*4: If the flash ROM data download fails, the LED blinks in green and orange alternately. (The Power and
Resume/Cancel buttons are invalid.) Return to step 1), and proceed to the following steps.
<How to use the USB tool>
- For Windows 98 or Windows Me (QISS software download: Ref. No. RQ-T01-A20-000004):
3
1.
Select the USB port.
2.
Click Open to open the file selection dialog box.
3.
Select the download file to send to the printer.
4.
Click Send. The selected file will be sent to the printer.
5.
When data sending finishes, click Exit to exit USBloader.exe.
- For Windows 2000 or Windows XP (QISS software download: Ref. No. RQ-T01-A20-000011):
2
4
5
1 - 17
*4
.
1
Advertisement
Table of Contents
