Anna Caster Pallet - EAW ADAPTive systems Accessory & Rigging Manual

Anna Caster Pallet

The Anna Caster Pallet is designed for transportation of up to 4 Anna modules. Anna modules
attach to the Caster Pallet via quick release pins.
1. Lower the Anna module onto the Caster Pallet so that the stack pads on the Anna module line
up with the recesses in the pallet.
2. Release the 2 quick release pins from the Caster Pallets Rigging Brackets.
3. Pull and turn over (to left) the two (2) Latch Grips to release the Rigging Latches from their
locked position, allowing the Rigging Latches to lower into the Caster Pallet's Rigging Brackets.
(See Step 2 in Rigging Modules from Modules)
4. Secure the 2 quick release pins back into the Caster Pallets Rigging Channels.
26