Appendix
Troubleshooting
I want to use my cordless headset with a different telephone base.
•
You need to deregister the headset from the current telephone base (page 65) and
then register it to the new telephone base.
I subscribe to a nontraditional telephone service that uses my computer
to establish connections, and my telephone doesn't work.
•
Make sure your computer is powered on.
•
Make sure your Internet connection is working properly.
•
Make sure that the software is installed and running for your nontraditional
telephone service.
•
Make sure to plug your USB telephone adapter into a dedicated USB port on your
computer. Do not plug into a multiple port USB hub (USB splitter) that is not powered.
•
In a few rare instances, the USB port on your computer may not have enough power.
In these instances, try using a USB hub with its own external power supply.
•
If you are using a firewall, it may prevent access to your nontraditional telephone
service. Contact your service provider for more information.
Common cure for electronic equipment.
•
If the telephone is not responding normally, put the cordless handset in the telephone
base. If it does not respond, try the following (in the order listed):
- Disconnect the power to the telephone base.
- Disconnect the battery on the cordless handset.
- Wait a few minutes before connecting power to the telephone base.
- Completely remove and install the battery again and place the cordless handset in
the telephone base or charger.
- Wait for the cordless handset to synchronize with the telephone base. Allow up to
one minute for this to take place.
74