Telephone Base And Handset Charger Installation - VTech DECT 6.0 IS6100 User Manual

Getting started

Telephone base and handset charger installation

Install the telephone base and handset charger as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL filter between the
telephone line cord and the telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL interference. Contact your DSL service
provider for more information about DSL filters.
Telephone
wall jack
Telephone
line cord
If you have DSL
high speed
Internet service,
a DSL filter (not
included) is
required.
• Use only the power adapters supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
• The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Telephone base
Electrical outlet
not controlled by
a wall switch
Telephone
base power
adapter
Handset
charger
adapter
2
Handset charger