Appendix; Battery - VTech CS6219 User Manual

Accessory handset for use with vtech models cs6219/cs6219-2/cs6219-3/ cs6219-4/cs6228-3/cs6228-6/ cs6229/cs6229-2/cs6229-3/ cs6229-4/cs6229-5
Hide thumbs Also See for CS6219:
Table of Contents

Advertisement

Appendix

Battery

It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can
expect the following performance:
Operation
While in handset use (talking*)
While in speakerphone mode (talking*)
While not in use (standby**)
*Operating times vary depending on your actual use and the age of the battery.
**Handset is not charging or in use.
The battery needs charging when:
A new battery is installed in the handset.
The handset beeps.
A battery is properly installed and the screen is blank.
LOW BATTERY or PLACE IN CHARGER shows on the handset screen.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.
vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800)
267-7377.
Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special
disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and might cause burns
or injury to the eyes or skin. The electrolyte might be toxic if swallowed.
Exercise care in handling batteries in order not to create a short circuit with conductive materials.
Charge the battery(ies) provided with or identified for use with this product only in accordance
with the instructions and limitations specified in this manual.
Observe proper polarity orientation between the battery and metallic contacts.
To prevent fire or shock hazard, do not expose this product to water or any type of moisture.
Operating time
Up to eight hours
Up to five hours
Up to six days
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents