HP ProLiant ML110 G1 User Manual page 28

Most of these tasks can be completed using the WebUI. All procedures
for the configuration tasks can be found in the HP ProLiant Storage Server
administration guide.
Place the storage server into an Active Directory or Windows NT ®
•
4.0 domain for ease of manageability (highly recommended).
• Enable protocols such as NFS sharing, NCP, and/or AppleTalk.
• Create shares corresponding to the protocols mentioned in the
previous steps.
• Configure shadow copies for creating point-in-time snapshots of
data volumes.
• Configure data replication software via Microsoft File Replication
Services.
• Enable and establish space usage quotas.
• Configure the Distributed File System (DFS) or publish the storage
server shares into an already existing DFS structure.
• Adjust logging for system, application, and security events.
• Install additional third-party software, such as backup, anti-virus,
or monitoring agents.
NOTE:
HP StorageWorks Library and Tape Tools installer software is
located on the storage server in the c:\hpnas\components\
tapetools folder. For more information about this product, go to
http://www.hp.com/support/tapetools.
NOTE:
HP highly recommends that you run Microsoft Windows updates
to identify, review, and install the latest, applicable, critical
security updates on the storage server. For recommendations,
instructions, and documentation to help manage the software
update, hotfix, and security patches process on the storage server,
Microsoft Software Updates on HP ProLiant Storage Servers
see
http://h18006.www1.hp.com/storage/storageservers.html.
• Configure UNIX® user and group mappings.
• Create and verify a full storage server system backup before
putting the system into production.
28 Storage server startup
at