IBM Power System S822 Installing Instructions page 23

page 9.
Figure 12. Extending the pin, and installing the bracket into the slide rail
5. Slide the mounting bracket (C) into the right slide rail until the spring-loaded pin snaps into place.
For details, see Figure 13.
Figure 13. Installing the extension bracket into the slide rail
6. Attach the mounting bracket (C) to the slot on the inside of the right slide by sliding the mounting
bracket (C) into the slide rail until the spring-loaded pin snaps into place. For details, see Figure 14 on
page 10.
Installing the IBM Power System S822 (8284-22A)
9