Reverb Effects; Off; Spring; Room - Vox E 1 Owner's Manual

Vox tonelab owner's manual e 1
Table of Contents

Advertisement

F. REVERB E
Here you can make settings for the reverb effect that is played after the cabinet.
You can choose one of three types of reverb.
(EX):
This indicates a parameter that you can control from the expression pedal
of the optional foot controller.
REVERB
SPRING/ROOM/PLATE

1. OFF

Select this if you don't want to use the reverb effect.

2. SPRING

A model of the most popular spring reverb system used in guitar amps.

3. ROOM

Emulates the natural reverberation that takes place in a medium sized room/small
hall.

4. PLATE

An unerringly accurate model of the plate reverb used in countless, professional
.
recording studios
[1] "LO DAMP" 0.0...10.0 Adjusts the dampening of the low-frequency range.
[2] "MIX"
0.0...10.0 Adjusts the mix amount of the reverb sound.
[3] "HI DAMP" 0.0...10.0 Adjusts the dampening of the high-frequency range.
INPUT LEVEL
FFECTS
LO DAMP: knob 1
"LO DAMP" 0.0...10.0
(EX)
This is the input level of the reverb controlled by the
optional foot controller.
MIX: knob 2
"MIX" 0.0...10.0
40
HI DAMP: knob 3
"HI DAMP" 0.0...10.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Valvetronix tonelab

Table of Contents