Replacing The Cartridge Of The Smartclean System - Philips S5391/12 Manual

ENGLISH
5000Series_EN_A6_CS6new.indd 45
4 Press the on/off button on the SmartClean
system to start the cleaning program.
- During the cleaning program (which takes approx.
10 minutes), the cleaning symbol flashes.
- When the cleaning program has been completed,
the ready symbol lights up continuously.
- The battery symbol lights up continuously to
indicate that the shaver is fully charged. This takes
approx. 1 hour.
Note: If you press the on/off button of the
SmartClean system during the cleaning program, the
program aborts. In this case, the cleaning symbol stops
flashing.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts.
Note: 30 minutes after the charging phase has been
completed, the SmartClean system switches off
automatically.
Replacing the cartridge of the SmartClean
System
If you clean the shaver in the SmartClean system
once a week, the SmartClean cartridge will last
approximately three months.
Replace the cleaning cartridge when the
replacement symbol flashes orange or when you are
no longer satisfied with the cleaning result. If used
once a week, the SmartClean cartridge will last for
approximately three months
45
15/05/15 11:0