Yamaha FX10X Assembly Manual page 75

R Make sure that the catch of the
holder is facing downward.
(FX10/FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
S DC back buzzer (FX10/
FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
T Fuse box
U Pass the wire harness and DC
back buzzer lead through the
guide, making sure that the guide
is positioned to the front of the
bolt. (FX10/FX10RTR/
FX10RTRA/FX10MTR/
FX10MTRA)
V Route the tail/brake light lead
below the rib on the fuel tank,
making sure not to pinch it
between the tank and the right
fuel tank cover.
W Right fuel tank cover
X Tail/brake light coupler
Y Negative battery lead
Z Negative battery lead coupler
[ Fuel sender coupler
\ Battery
] DC back buzzer coupler (FX10/
FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
_ Fuel tank breather hose
a Fasten the brake hose with the
holder.
b Fasten the fuel tank breather
hose to the rear cross member
with the plastic band.
c Main switch coupler
d Wire harness
e To the wire harness
f Pass the wire harness through
the guide, making sure that the
guide positioned to the front of
the bolt. (FX10RT/FX10MT)
g DC back buzzer lead (FX10/
FX10RTR/FX10RTRA/
FX10MTR/FX10MTRA)
h Fasten the parking brake cable
with the holder, making sure to
bend the holder so that its end
contacts the side of the bolt head
as shown in the illustration.
6-12