JUKI MO-6000G Series Engineer's Manual page 74

©
Portion of the setscrews of the dust-proof rubber case {JUKI seal)
Apply the sealant to the oil shield case setscrew
O
{1 pc.) and the dust-proof rubber case
8
setscrews
(4 pcs.)
®
Oil shield plate assembly (JUKI seal)
Apply the sealant to the inside of the oil shield plate
8.
Vh" //4'-"""~~-'L..ol::..L-<:'-441~...:.;._-
Apply
the sealant to
the hatched parts.
Inside contact surface
®
Portion of the feed mechanism cover (Three-bond 1212)
Apply the sealant to the rear face of the feed mechanism cover, the top surface of the oil shield plate,
the oil shield rubber support plate , the top surface of the oil shield case, and the hatched parts on the
top surface of the feed bar presser.
Apply
the
sealant
to the
top surface of the oil
shield plate.
Apply the sealant to the oil shield rubber support
plate and the top surface of the oil shield case.
Be careful that the sealant should not overflow on
the side of the oil shield
rubber.
-70-
Feed mechanism
cover
(rear face)
0 0
0 O
Ughtly apply the sealant to the rear
face of the feed mechanism cover
and the top surface of the feed bar
presser.
.::·.: