Catalytic Converter - Volvo S60 S60R Owner's Manual

11 Specifications

Catalytic converter

General
The purpose of the catalytic converter is to
purify exhaust gases. It is located in the flow
of exhaust gases close to the engine so that
it quickly reaches operating temperature. The
catalytic converter consists of a monolith
11
(ceramic or metal) with channels. The chan-
nel walls are lined with a thin layer of plati-
num, rhodium and palladium. These metals
act as catalysts, i.e. they participate in and
accelerate a chemical reaction without being
used up themselves.
TM
Lambda-sond oxygen sensor
The Lambda-sond is part of a control system
intended to reduce emissions and improve
fuel economy.
An oxygen sensor monitors the oxygen con-
tent of the exhaust gases leaving the engine.
This value is fed into an electronic system
that continuously controls the injection
valves. The ratio of air to fuel is continuously
adjusted. These adjustments create optimal
conditions for efficient combustion, and to-
gether with the three-way catalytic converter
reduce harmful emissions (hydrocarbons,
carbon monoxide and nitrous oxides).
253