Volvo S60 S60R Owner's Manual page 191

09 Maintenance and service
Replacing bulbs
09
Position/parking lamps
Halogen and Bi-Xenon headlamps
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover (same cover as for
dipped beam).
– Pull out the lamp.
– Unplug the connector.
To fit
– Fit the new bulb.
– Plug in the connector.
– Refit the cover.
190
Active Bi-Xenon headlamps
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover (same cover as for
dipped beam).
– Pull out the lamp.
– Unplug the connector.
To fit
– Fit the new bulb.
– Plug in the connector.
– Refit the cover.
Direction indicator, left-hand side
To remove the bulb
– Switch off all lights and turn the ignition
key to position 0.
– Twist the bulb holder anticlockwise and
remove it.
– Press the bulb inwards, turn it anticlock-
wise and remove it from the bulb holder.
To fit
– Fit the new bulb by pressing it in and
turning it clockwise.
– Refit the bulb holder in the lamp housing
and turn it clockwise.