Selecting Your Osd Language; Input Select Menu - Dell W2600 Owner's Manual

After you have made your selections, select the Exit.
6
To exit the OSD, press Menu on the remote or select Exit from the main menu.
7

Selecting Your OSD Language

Press Menu to enter the OSD.
1
Select Setup.
2
In the Setup menu, select Language and select the language that you want the OSD to
3
appear in.

Input Select Menu

The Input Select menu allows you to select the proper source based on how you have your wide
LCD monitor and video equipment connected. Press Input on the remote to go directly to the
Input Select menu. You can also press Menu and select Input Select from the main menu.
E X I T
VGA
DVI
T V
AV 1 ( C O M P O S I T E 1 )
AV 2 ( C O M P O S I T E 2 )
AV 3 ( S V I D E O 1 )
AV 4 ( S V I D E O 2 )
AV 5 ( C O M P O N E N T 1 )
AV 6 ( C O M P O N E N T 2 )
D 4
C A R D R E A D E R
S H OW I N P U T S
T V — Select when you have your antenna or cable connected to the ANT/Cable connector. See "Bottom
View" on page 56 for the location of the ANT/Cable connector.
AV1 — Select when you have a video device, such as a video game system, connected to the composite
connector on the side of the wide LCD monitor . See "Left Side View" on page 55 for the location of the
composite connector.
74
Using the On-Screen Display
I N P U T S E L E C T
A L L
NOTE:
to select Active or All. Active searches
for which connectors are being used.
The available input sources appear in
white and input sources that are not
available appear in grey. All shows all
the input sources and allows you to
select all the input sources even if you
do not have a device connected.
VGA — Select when your wide LCD
monitor is being used as a computer
monitor and you have connected the
computer using a VGA cable. See
"Bottom View" on page 56 for the
location of the VGA connector.
DV I — Select when you have a
device, such as a set-top box,
connected to the DVI connector. See
AC T I V E
"Bottom View" on page 56 for the
location of the DVI connector.
Show Inputs allows you