Fisher & Paykel DD24 User Manual page 42

How to attend to a fault
Integrated models with remote control
START HERE
Try to open the drawer
(without using excessive force).
NO
YES
Press 0 on the wash l
program panel to stop[
u
the beeping, then
follow the applicable
Linstructions be ow. ]
Ul:Turn on the water supply,
÷ press 0, then close the drawer to
resume the wash program.
U4: Attend to the fault on
the other drawer. The drawer
displaying U4 is not faulty.
,Check which program indicators
are lit on the wash program panel
Look up what fault code the
indicators correspond to [n the
tame opposite.
Note down the code here:
o o o o
HEAVY NORMAL FAST DELICATE RINSE
U6: Open the drawer and check the] spray arm.
l Has the spray arm loosened or
come off its mounting?
YES I NO
Refit the spray arm
following instructions
in section 'User
maintenance
instructions', then close
the drawer and press
HI to resume the wash
program.
Pressand hold _ until you
hear a quick double beep.
Do the fault code indicators
and beeping come back in a
few seconds?
YES NO
Press _ on the wash program panel.
The Eco indicator and another set of
program indicators will briefly light
up. Mark which ones in the diagram
below. This information will help
Fisher & Payke[ [dentil}, the fault more
precisely. Which other indicators fight
up when you press _ ?
HEAVY NORMAL FAST DELICATE RINSE W
YES