Fisher & Paykel DD24 User Manual page 22

Water softener
Notes:
[f your water hardness is above 625ppm/36 gpg, we highly recommend you completely fill the
detergent dispenser for all programs except Rinse and the rinse aid setting should be at 5. If your
water hardness is above 625ppm/36 gpg, the wash performance of your dishwasher will decline.
You may hear some unusual noises when the water softener is in operation, this is normal.
How to fill the salt reservoir
1 Open thedrawer(s).
2 Unscrew the salt reservoir cap by turning anticlockwise.
3 Place the salt into the salt container and pour the contents into the salt reservoir.
The salt reservoir can hold up to approximately 1 Ib/O.5 kg of salt.
4 Fit the cap tightly back into its original position.
5 [f you do not wash your dishes immediately after filling the salt reservoir, run a Rinse program to
remove any salt water or spilt granules.
Note:
When filling the salt reservoir, you may notice water being displaced from the water softener
overflow.
Salt
reservoir
Salt
container