Selecting Inputs; Setting The Picture To User's Preferences - Vizio VA320M User Manual

VIZIO VA320M User's Manual

Selecting Inputs

1. Press INPUT on the remote or on the side of
your HDTV to select the input source that
matches the connection you made on the back
of your HDTV. A repeated press of INPUT
cycles you through the options.
2. Turn on your component (cable box, VCR,
satellite receiver, DVD player, etc.). You should
see a picture on your HDTV. If you do not see
a picture, press INPUT repeatedly until you do
see a picture.
NOTE: If the selected input is RF, your HDTV
needs to be on either channel 3 or 4 to match
the channel on the VCR, cable box, external TV
tuner or satellite receiver. Refer to the User's
Manual of your equipment for details.
NOTE: Your HDTV will display the television
station or program selected by the cable box,
VCR, external tuner, or satellite receiver. Use
the remote control that came with that
component to change programs or channels. If
the service being used is the one which setup
includes a box with two outputs for two
different (distant) rooms, then scanning
channels will help you to find the signal. Be
aware that the channel to be selected varies
from provider to provider. You may have to call
your provider to get the specific channel when
using your HDTV. Some examples of these
channels are 105, 106, 115, and 116.
Setting the Picture to user's
preferences
1. Press MENU on the remote control. The Main
menu opens.
2. Press ! or " to select Picture option, then
press #. The Picture Settings menu opens.
3. Press # to see the different Picture modes.
4. Press !or " to select Custom mode.
5. Press MENU/SELECT key to select it.
6. The Custom menu opens. Parameters as
Brightness, Contrast, Saturation, Hue,
Sharpness and Backlight are adjustable;
Contrast Enhancement, Color Stretch and DCR
are switchable On or Off, and Color
Temperature has selections of Cool, PC,
Normal and Custom. Make the desired
changes and exit the menu by pressing EXIT
on the remote control.
26
www.VIZIO.com