Selecting Inputs; Fine-Tuning The Picture - Vizio VECO320L 1A User Manual

Selecting Inputs

1. Press INPUT on the remote or on the side of
your HDTV to select the input source that
matches the connection you made on the
back of your HDTV. Repeated presses of
INPUT cycles you through the options.
2. Turn on your component (cable box, VCR,
satellite receiver, DVD player, etc.). You
should see a picture on your HDTV. If you do
not see a picture, press INPUT repeatedly
until you do see a picture.
NOTE: If the selected input is RF, your HDTV
needs to be on either channel 3 or 4 to match
the channel on the VCR, cable box, external
TV tuner or satellite receiver. Refer to the
User's Manual of your equipment for details.
NOTE: Your HDTV will display the television
station or program selected by the cable box,
VCR, external tuner, or satellite receiver. Use
the remote control that came with that
component to change programs or channels.
If the service being used is the one which
setup includes a box with two outputs for two
different (distant) rooms, then scanning
channels will help you to find the signal. Be
aware that the channel to be selected varies
from provider to provider. You may have to
call your provider to get the specific channel
when using your HDTV. Some examples of
these channels are 105, 106, 115, and 116.

Fine-tuning the picture

1. Press MENU on the remote control. The
Picture menu opens.
2. Press " or # to select Color Temperature,
then press !. The Color Temperature menu
opens.
3. Press $ or ! to select Normal, then press
LAST twice to return to the Picture menu.
4. Press "or # to select Picture Mode.
5. Press ! to select Standard.
Press LAST repeatedly to exit the menu.
Version 10/21/2008
VIZIO VECO320L1A User's Manual
25
www.VIZIO.com