Chapter 1 Basic Controls And Connections; Front Bezel; Right Side Panel Controls - Vizio SV470XVT1A User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Bezel

POWER 'VIZIO' LIGHT– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to
the sensor. Point the remote control directly at this
window for the best response to the remote signal.

1.2 Right Side Panel Controls

POWER ( ) – Switch the SV470XVT1A on by pressing the button once. Press the button again to
turn the SV470XVT1A off.
MENU – This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will return to the previous menu level.
CHANNEL +/- – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons
function as up and down controls in the
OSD menus.
VOLUME +/- – Use these buttons to
increase or decrease to the speaker volume.
While the OSD is active, these buttons
function as left and right controls in the
OSD menus.
INPUT (ENTER) – Repeated pressing of
this buttons steps through the input sources
in the following sequence: TV, AV1, AV2
(S-Video), Component 1, Component 2,
RGB, HDMI1, HDMI2, HDMI3 and HDMI4.
Once you have stepped through the entire
sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu
function to be adjusted. When the OSD is not active, this button will
show the current input selections.
TX INPUT – This slot is used only when upgrading your TV to Dolby Digital 5.1wireless surround system.
Do not insert any object into the slot which may compromise the integrity and functionality of
your TV. The manufacturer's warranty does not cover user abuse or improper use of this input.
Version 6/2/2008 10
www.VIZIO.com
VIZIO SV470XVT1A User Manual