Marantz BD8002 User Manual page 37

<Speaker setting for the audio signal output from the 7.1ch AUDIO OUT jacks>
Setup" Quick" 7.1 ch Audio Out .. Multi Channel
Setup" Custom" Audio .. 7.1 ch Audio Out .. Multi Channel
Function Setup
Speaker Setting .
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / S.l-channel
surround.
<Example of basic layout with 7.1 ch surround system>
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from the HOMI OUT jack>
(Available when you have HOMI cable connected to the HOMI OUT jack)
Setup" Quick" HOMI Audio Out .. HOMI Multi(LPCM)
Setup" Custom" Audio .. HOMI Audio Out .. HOMI Multi(LPCM)
Menu
I
Setting items
I
Options
I
Descriptions
Speaker Configuration Front
Large*
Large:
Select the desired
Small
For the large speakers
speaker to set. Then
Center
with strong low frequency
change the setting
Large*
reproduction capabilities.
appropriately by
Small/None
Small:
referring to the
Subwoofer
On*
For the small speakers
descriptions.
which do not provide
Off
strong bass sound.
Surround
Large*
None:
Small/None
No speakers.
For "Subwoofer" there is
Surround Back
Large*
only "On" or "Off".
Small/None
Crossover Freq: 40/60/80*/ Select according to the
For speakers set to
100/120Hz low frequency
"Small", the sound
reproduction capabilities
with frequencies
ofthe connected speaker.
below that of this
frequency are cut.
This bass sound that
has been cut is
output from the
subwoofer or a
speaker for which
"Large" is set.
Function Setup
How to navigate through the "HOM I Multi(LPCM)" and "Multi Channel" setting
1) Use
[.6. /
V] to select the menu item.
2) Use [.6. / V] to select setting items.
• Use [RETURN] to go back to the previous screen. .
3) Use [<1/!>] to select desired options.(Except for "Test Tone" and "Default".)
For "Test Tone":
Use [<1/ !>] to select "Manual" or "Auto", then press [ENTER].
• The test tone will be output. If you select "Manual", use [.6./ V] to select desired speaker, then use
[<1/ !>] to adjust the volume. If you select "Auto", use [<1/ !>] to adjust the volume of the speaker
that output the test tone.
• If you want to stop the test tone, press [RETURN].
For "Default":
Press [ENTER] to reset the "Delay Time" setting to the default.
4) Press [SETUP] to exit.
Front speaker (right) Front speaker (left)
• For "Speaker Configuration", the settings of each speaker sizes may be adjusted automatically
corresponding to each setting. (e.g. If the "Front" is set to "Small", the "Subwoofer" will automatically
set to "On" and also you cannot set "Center", "Surround", and "Surround Back", to "Large".)
• Ifyou connect to S.l-channel surround system, set "Surround Back" in "Speaker Configuration" to "None".
• "None" for "Center", "Surround" and "Surround Back" is not available for the speaker setting for the
audio signal output from the HOMI OUT jack.
• "Off' for "Subwoofer" is not available for the speaker setting for the audio signal output from the
HOMI OUT jack.
34
ENGLISH