Adjusting The Picture - Marantz BD8002 User Manual

Hide thumbs Also See for BD8002:
Table of Contents

Advertisement

Playback
I
Adjusting the Picture
1) During playback, press [MODE] repeatedly until the picture
adjustment menu appears•
• Picture adjustment menu:
Memory1
~
2) Use
[~
1 \7]
to select a memory from "Memory 1" to
"Memory 5" to store your setting, then press [ENTER].
3) Use
[~
1 \7]
to select a item to be adjusted, then use
[<11
[>]
to adjust the setting.
Memory 1
:eJ~
14.V_Posltlon Control
0
~ L(),
1.Contrast
"'+1~
~'.f
2.Brlghtnes
0
• To reset to the default setting, press [RETURN], use
[~I
\7]
to select "STD", then press [ENTER].
List of picture adjustment item/values
• Gamma correction
• To adjust "Gamma Correction", after selecting the item at step 3,
press [ENTER], then use
[~
1 \7 1<11
[>] to adjust the setting.
• In the graph of gamma correction, the horizontal axis indicates
the brightness level of the image that is recorded on the disc,
and the vertical axis indicates the brightness level of the image
when it is output from this unit.
• When bright points of the disc side are adjusted to the "dark" of
the output side, the fine parts of the bright portion that normally
become hard to see, become an easily discerned image.
Playback
• When dark points of the disc side are adjusted to the "bright" of
the output side, the fine parts of the dark portion that normally
become hard to see, become an easily discerned image.
4) Press [RETURN] repeatedly to exit.
Note
• This setting is not effective for the picture output from VIDEO
OUT and SVIDEO OUTjack.
• The setting remains even you turn off the unit.
• You cannot adjust the setting during the rapid playback,or
when the pure direct is set to HVideo Off" or HAil
Off".
• DNR can also
be
adjusted by pressing <VIDEO NR (NOISE
REDUCTION» on the front panel. (refer to page 7.)
Item
I
Description
I
Adjustment range (default)
1. Contrast
Adjusts the difference between the bright and dark parts of the picture.
-6to +6 (0)
2. Brightness
Adjusts the brightness of the picture.
Oto +12 (0)
3. Enhancer*'
Strengthens the contours of the picture.
Oto +11 (0)
4. DNR*'
Reduces the overall level of noise on the picture.
Off to +3 (Off)
5. Gamma Correction
Detailed adjustment of the picture's brightness.
16 to 235 (GO=24/G 1=32/G2=48/G3=64/ G4=80/G5=96/ G6= 128/G7=160/ G8=192/G9=224)
6. Sharpness Mid*2
Adjusts the sharpness of the picture for the medium frequency range.
-6 to +6 (0)
7. Sharpness High*'
Adjusts the sharpness of the picture for the high frequency range.
-6 to +6 (0)
8. Hue*'
Adjusts the balance between the green and red.
-6 to +6 (0)
9. White Level
Adjusts the white level.
-5 to +5 (0)
1O.Black Level*'
Adjusts the black level.
-5 to +5 (0)
11.Chroma Level
Adjusts the density of the colors.
-6 to +6 (0)
12.5etup Level
Makes the black parts ofthe pictures brighter.
OIRE
: Shows the original picture as recorded.
7.5 IRE : Makes the dark parts brighter.
(7.5 IRE)
13.H_Position Control*'
Adjusts the left/right position.
-7 to +7 (0)
14.V_Position Control*'
Adjusts the top/bottom position.
-7 to +7 (0)
*' Effective for the video signal of COMPONENT VIDEO OUT (except for 480i) and HDMI OUT jacks.
*2 Not effective for the video signal of HDMI OUT jack.
24
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents