Installation Instructions - Whirlpool AWM 320 Quick Reference Manual

TRANSIT BOLTS
The appliance is fitted with transit bolts to prevent
internal damage while it is being moved.
Before using the appliance the transit bolts MUST
be removed (Fig. 1).
1. Slacken the bolts with the spanner supplied (Fig. 2).
2. Unscrew the bolts by hand.
3. Hold each bolt head and pull the bolts complete
with red plastic spacer through the wide part of the
holes.
4. Close the holes with the provided plastic caps.
Fit the caps in the direction indicated by the arrow
in the large opening and slide them into the narrow
slot until they sit properly (Fig. 3).
5. Keep the transit bolts for future use.
Note:
Fit the transit bolts before transporting the appliance as
follows:
1. Pry up the plastic caps with a screwdriver, slide
them out against the direction indicated with the
arrow and remove them.
2. Fit the transit bolts by following the above
procedure in reverse order.
14

INSTALLATION INSTRUCTIONS

Fig. 1
Fig. 2
Fig. 3