Table of Contents
Advertisement
36-8 IP Policy Routing
To force Web packets coming from clients with IP addresses of 192.168.1.33 to
192.168.1.64 to be routed to the Internet via the WAN port of the Contivity 251,
follow the steps as shown next.
Figure 36-7 IP Routing Policy Example
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol
Type of Service= Don't Care
Precedence
Source:
addr start= 192.168.1.33
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
Gateway addr
Type of Service= No Change
Precedence
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Step 3.
Step 4.
Step 5.
317516-A Rev 00
Create a routing policy set in menu 25.
Step 1.
Create a rule for this set in Menu 25.1.1 — IP Routing Policy
Step 2.
as shown next.
Menu 25.1.1 - IP Routing Policy
= 6
= Don't Care
= 192.168.1.1
= No Change
Check Menu 25.1 — IP Routing Policy Setup to see if the rule is
added correctly.
Create another policy set in menu 25.
Create a rule in menu 25.1 for this set to route packets from any host
(IP=0.0.0.0 means any host) with protocol TCP and port FTP access
through another gateway (192.168.1.100).
Packet length= 10
Len Comp= N/A
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Log= No
Advertisement
Table of Contents
