Introduction; About This Guide - Extron electronics VoiceLift Pro Microphone EB Kit Series User Manual

Table of Contents

Advertisement

Introduction

This section covers the following topics:

About this Guide

This guide describes the components, installation, and operation of Extron VoiceLift Pro
Microphone EB Kits, which include the pendant or handheld microphones, the receiver,
and the charging station (see
page for details).
CAUTION: Risk of explosion. Do not replace the battery with an incorrect type. Dispose
ATTENTION : Risque d'explosion. Ne pas remplacer la pile par le mauvais type de pile.
ATTENTION:
The following terms are used in this guide:
About this Guide
About the VoiceLift Pro Microphone EB Kits
VoiceLift Pro Microphone Features
Application Diagram
About the VoiceLift Pro Microphone EB Kits
of used batteries according to the instructions.
Débarrassez-vous des piles usagées selon le mode d'emploi.
Installation and service must be performed by authorized personnel only.
L'installation et l'entretien doivent être effectués par le personnel autorisé
uniquement.
UL listed electrical boxes are recommended.
Des boîtiers électriques approuvés UL sont recommandés.
"Microphone" refers to the VLP 302 or VLH 302.
"Receiver" refers to the VLR 302EB receiver. The receiver can be mounted into Extron
enclosures or can be rack mounted. One receiver can host up to two microphones.
"Charging station" refers to the VLC 302 charger for dual microphones (VLP or VLH).
VoiceLift Pro Microphone EB Kits User Guide • Introduction
on the next
1

Advertisement

Table of Contents
loading

Table of Contents