Fm Operation; Auto Scan; Manual Tune; Scan Setting - JVC RA-D77M Instruction Manual

FM Operation

Press MODE button repeatedly to select FM mode.
-Or-
Press MODE button and then turn the VOLUME/SELECT dial to select the FM mode. Press
VOLUME/SELECT dial to confirm.

Auto Scan

While listening to an FM station, press and hold
station has been found, the scanning will stop automatically.
-Or-
button, and then press VOLUME/SELECT dial. Your radio will search forwards
Press
or backwards until it reached the next available station.

Manual Tune

To tune FM frequency manually, press
frequency is reached.
Each turn will adjust the frequency by 0.05MHz. If reception is still poor, adjust the position of
the DAB/FM aerial or try moving the radio to another location.

Scan Setting

In the Scan Settings menu you can choose if you want your radio to tune to Strong
Stations Only or select All Stations, and it will try to tune to all stations, however some
may be very weak.
1. In FM mode, press MENU to display the FM
menu.
2. Turn VOLUME/SELECT dial to select Scan
setting and then press VOLUME/SELECT dial
to confirm.
You'll now be asked if you want to scan for strong
stations only or not.
3. Turn VOLUME/SELECT dial to select Strong
Stations Only or select All Stations, then
press VOLUME/SELECT dial to confirm.
button to perform auto scan. Once a
button repeatedly until your desired
FM
Scan Setting
Audio Setting
System Settings
FM
Strong Stations Only
All Stations
10:45
Strong St>
Stereo Al>
>
10:45
✓
21