Vivotek Network Camera IP7133/IP7134 User Manual page 40

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
■ Maximum frame rate
This limits the maximal refresh frame rate per second. Set the frame rate higher for a smoother video
quality.
If the power line frequency is set to 50Hz, the frame rates are selectable at the following rates: 1fps,
2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps and 25fps. If the power line frequency is set to 60Hz, the
frame rates are selectable at the following rates: 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps,
25fps and 30fps.
■ Video quality
The video qualities are selectable at the following settings: Medium, Standard, Good, Detailed and
Excellent.
Audio settings
Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note
that if mute mode is turned on, no audio data will be transmitted to all clients even though the audio
transmission is enabled in the Client Settings page. In that case, the following message is displayed.
Internal microphone input gain: There are two options for external microphone input gain, 0db and 20db.
Audio type: Select audio codec AAC or GSM-AMR and the bit rate.
■ AAC targets at performing good sound quality at the cost of higher bandwidth consumption. The bit
rates are selectable at the following rates: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps and128Kbps.
■ GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are
selectable at the following rates: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps,
10.2Kbps and 12.2Kbps.
When completed with the settings on this page, click Save to take effect.
40 - User's Manual