Switching The Equalizer On/Off; Resetting The Equalizer - Blaupunkt Bremen MP78 Manual

DSA – Digital Sound Adjustment
u
Press the softkey for the loudspeak-
ers for which you want to perform the
equalizer settings.
Notes:
• In crossover mode, the selection be-
tween front and rear loudspeakers
and the centre speaker is not avail-
able.
• For the "Manual L=R" setting, you per-
form the equalizer settings together
for the entire loudspeaker system as
described below.
• For the "Manual L#R" setting, you can
perform the equalizer settings sepa-
rately for the left and right channel. To
do so, press the softkey "Left" 6 or
"Right" ;.
In the displayed menu, the fi rst 5 bands
of the equalizer are available. Pressing the
"Next" softkey ; calls up the follow-up
menu for selecting the 6th and 7th band.
From there, you can return by pressing the
"Previous" softkey ;.
Note:
For the setting of the centre speaker
("Center"), only 5 bands are available.
u
Press the softkey of the desired band.
For every band, you can perform the follow-
ing settings individually:
"Frequency" 6: Select a frequency
•
between 20 Hz and 20,000 Hz for the
band.
"Gain" 7: Adjust the level for the band
•
between –10 dB and +10 dB.
"Q Factor" 8: Adjust the quality factor
•
for the band between 0.1 and 10.
u
Press the softkey of the desired set-
ting.
150
u
Adjust the desired value by pressing
> or button @ (down) or
the
> or @ (up).
When you have fi nished making your
changes,
u press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.

Switching the equalizer on/off

To switch an equalizer on or switch all equal-
izers off,
u press the MENU button A.
u Press the softkey "Audio Settings" 6.
u Press the "DSA" softkey 9.
The display shows the DSA menu.
u Press the "User equalizer" softkey 6.
To switch one of the 3 equalizers on,
u
press the softkey for the desired equal-
izer (Equalizer 1 – 3).
OR:
u Press the "Equalizer Off" softkey ; to
switch the equalizers off (neither of the
3 equalizers is switched on).

Resetting the equalizer

All automatically determined values of the
selected equalizer can be reset.
To reset an equalizer,
u press the MENU button A.
u Press the softkey "Audio Settings" 6.
u Press the "DSA" softkey 9.
The display shows the DSA menu.
u Press the "User equalizer" softkey 6.
u
Press the softkey for the equalizer
(Equalizer 1 – 3) to be reset.