Yamaha SR-B20A User Manual page 24

PREPARATION > Connecting a TV
1
Connect a TV to the sound bar.
HDMI OUT/TV (ARC) jack
TV jack
1. Remove the cap.
2
Connect the sound bar to power.
Sound bar (rear)
NOTE
• To activate the Audio Return Channel (ARC), enable the HDMI Control function of the sound bar. (The function is enabled by
default.)
• Use a 19-pin HDMI cable with the HDMI logo printed on it.
• Use a cable that is as short as possible to prevent any degradation in signal quality.
• Connect an AV device (such as a set top box) to the TV.
Related links
"Enabling/disabling the HDMI Control function" (p.44)
HDMI
Sound bar (rear)
O O
2. Check the orientation
of the plug.
HDMI input
HDMI IN
HDMI HDMI
OPTICAL
O O
Audio output (Digital optical
audio)
Power cord (supplied)
To an AC wall outlet
24
TV